What To Know
- If the space heater is plugged into a working outlet but still not working, check the fuse in the plug.
- If the space heater is plugged in and there is still no power, the heating element may be the problem.
- If the space heater is plugged in and the fan is running, but no heat is being produced, the fan may be the problem.
If you’re having trouble resetting your Lasko space heater, you’re not alone. Many Lasko space heaters have a reset button on the back or side of the unit. To reset your heater, simply locate the reset button and hold it for 5 seconds. The heater should reset and start working again. If the problem persists, you may need to contact Lasko customer service for assistance.
How To Reset Lasko Space Heater
Lasko space heaters come with a reset button, which is used to reset the device in case of any issues. To reset a Lasko space heater, follow these steps:
1. Locate the reset button on your Lasko space heater. It is usually located on the back of the device, near the power cord.
2. Press and hold the reset button for 10 seconds.
3. Release the reset button.
4. Your Lasko space heater should now be reset and should work properly.
If the reset button does not fix the issue, you may need to contact Lasko’s customer service for assistance. They may be able to provide additional troubleshooting steps or offer a replacement if your Lasko space heater is under warranty.
Why Is My Lasko Space Heater Not Working?
- If your Lasko space heater is not working, there could be several reasons why. Here are five potential causes and solutions:
- 1. Check the power source: Make sure that your space heater is plugged into a working electrical outlet and that the outlet has power. If the outlet is not working, try plugging the space heater into another outlet.
- 2. Check the fuse: If the space heater is plugged into a working outlet but still not working, check the fuse in the plug. If the fuse is blown, replace the fuse with a new one.
- 3. Check the heating element: If the space heater is plugged in and there is still no power, the heating element may be the problem. Check the heating element for any signs of damage or wear, such as scorch marks or frayed wires. If the heating element is damaged, it will need to be replaced.
- 4. Check the controls: Make sure that the thermostat and other controls are set correctly and that the space heater is turned on. If the controls are set incorrectly or the space heater is turned off, it will not produce heat.
- 5. Check the fan: If the space heater is plugged in and the fan is running, but no heat is being produced, the fan may be the problem. Check the fan for any signs of damage or wear, such as loose blades or a broken motor. If the fan is damaged, it will need to be replaced.
How Do I Troubleshoot My Lasko Space Heater?
Troubleshooting a Lasko space heater can be relatively simple. Here are a few common issues and their solutions:
1. No Heat: If your Lasko space heater is not producing heat, there may be a few reasons for this. First, make sure that the unit is plugged in and that the outlet is working. If the outlet is good, check the circuit breaker or fuse box to see if the heater has tripped a fuse. If it has, reset the fuse and try using the heater again. If it continues to trip the fuse, there may be an issue with the heater itself. In this case, contact Lasko customer service for assistance.
2. Thermostat Issues: If your Lasko space heater is not turning on, there may be an issue with the thermostat. First, make sure that the thermostat is set to the correct temperature. If the temperature is set correctly, try adjusting the thermostat sensitivity. If the thermostat sensitivity is set correctly, try cleaning the thermostat with a soft cloth. If none of these solutions work, there may be an issue with the thermostat itself. In this case, contact Lasko customer service for assistance.
3. Overheating: If your Lasko space heater is overheating, there may be a few reasons for this. First, make sure that the unit is placed in a well-ventilated area. If the heater is too close to a wall or other obstruction, it may be overheating. Additionally, make sure that the heater is not covered or blocked by anything. If the heater is covered, the heat will not be able to escape, causing the unit to overheat.
4. Safety Features: If your Lasko space heater is not turning on, there may be an issue with the safety features. First, make sure that the heater is not blocked or covered by anything. If the heater is blocked, the safety features will not be able to detect it, causing the heater to shut off. Additionally, make sure that the heater is not too close to any flammable objects. If the heater is too close to a flammable object, the safety features may detect it, causing the heater to shut off.
What Are The Common Problems With Lasko Space Heaters?
Lasko space heaters are a popular option for heating small rooms or specific areas in a home. However, as with any appliance, there are a few common problems that users may encounter.
One common problem reported by users of Lasko space heaters is inconsistent heating. Some users have found that their space heater does not heat evenly, leaving some areas of the room warmer than others. This can be due to the positioning of the heater in the room, the type of heater being used, or other factors.
Another common problem reported by users of Lasko space heaters is overheating. Some users have found that their space heater becomes too hot to the touch, posing a potential safety hazard. This can occur if the heater is left on for an extended period of time or if the heater is too close to flammable materials.
Additionally, some users have found that their Lasko space heater is difficult to use. Some have reported issues with the controls, such as difficulty adjusting the temperature or turning the heater on and off. Others have reported issues with the heater’s design, such as difficulty moving it from room to room.
Overall, Lasko space heaters are a popular option for heating small rooms or specific areas in a home. However, as with any appliance, there are a few common problems that users may encounter. It is important to carefully read the instructions and safety warnings provided with the heater and to follow them to reduce the risk of these problems occurring.
How Do I Clean My Lasko Space Heater?
Cleaning a Lasko space heater can be a relatively easy task, but it is important to take the proper precautions to ensure that the heater remains safe and undamaged. Here are some steps you can follow to clean your Lasko space heater:
1. Unplug the heater: Before cleaning the heater, it is important to unplug it to avoid any risk of electric shock.
2. Remove the heater cover: Most Lasko space heaters have a removable cover that can be taken off for cleaning. To remove the cover, simply lift it off and set it aside.
3. Use a soft cloth or vacuum cleaner: Use a soft cloth or vacuum cleaner to remove any dust or debris that may be on the surface of the heater. Be careful not to scratch or damage the heater’s surface.
4. Clean the heating element: The heating element of a Lasko space heater can become very hot, so it is important to be careful when cleaning it. Use a soft cloth or vacuum cleaner to remove any dust or debris that may be on the heating element.
5. Replace the heater cover: Once you have cleaned the heater, replace the cover and plug it in.
It is important to regularly clean your Lasko space heater to keep it running smoothly and efficiently. By following these simple steps, you can keep your heater clean and in good condition.
How Do I Maintain My Lasko Space Heater?
Maintaining your Lasko space heater is important for ensuring its longevity and optimal performance. Here are some tips on how to maintain your Lasko space heater:
1. Regularly clean the heater: Dust and debris can build up on the heater over time, which can shorten its lifespan and affect its performance. To clean your Lasko space heater, use a damp cloth to wipe down the outside of the unit. For the interior, use a vacuum cleaner with a soft brush attachment to remove any dust or debris that may have accumulated.
2. Check the heater’s filters: Lasko space heaters typically have filters that are designed to trap dust and debris. These filters should be cleaned or replaced regularly to ensure that the heater operates efficiently. To clean the filter, remove it from the heater and use a vacuum or damp cloth to gently clean it. If the filter is damaged or dirty, it should be replaced.
3. Check the heater’s cord: The cord on your Lasko space heater should be checked for any signs of fraying or damage. If the cord is damaged, it should be replaced immediately to avoid the risk of an electrical fire.
4. Check the heater’s temperature settings: Lasko space heaters come with adjustable temperature settings, so it’s important to check them regularly to ensure that they are set to the correct temperature. If the temperature settings are not correct, the heater may not operate properly or safely.
5. Check the heater’s safety features: Lasko space heaters come with a variety of safety features, such as automatic shut-off and overheat protection. These features should be checked regularly to ensure that they are functioning properly.
6. Keep the heater away from flammable objects: Lasko space heaters produce heat, so it’s important to keep them away from flammable objects such as curtains, bedding, and clothing.
7. Do not cover the heater: Lasko space heaters are designed to be uncovered, so do not cover them with blankets, sheets, or other fabrics.
In a nutshell
If you’re still having trouble getting your Lasko space heater to work properly after trying these methods, then you may need to reach out to a professional for assistance.
