What To Know
- If the air filter is dirty or the air inlet is blocked, the dehumidifier will not be able to pull in enough air.
- If the humidity level in the room is too low, the dehumidifier may not be able to collect enough water.
- If the water reservoir is full and the power cord is secure, the next step is to check the filter.
If you’re here, you’re likely a proud owner of a Hisense dehumidifier. These appliances are a great way to keep your air dry and comfortable, but they can sometimes run into problems. One common issue that people experience with Hisense dehumidifiers is when they stop pumping water. This can be a frustrating problem, but it’s important to remember that it’s not necessarily an indication that your dehumidifier is broken. In this blog post, we’re going to explore some common reasons why your Hisense dehumidifier might not be pumping water, and what you can do to fix it.
Why Is My Hisense Dehumidifier Not Pumping Water?
If your Hisense dehumidifier is not pumping water, there could be several reasons for this. Here are some troubleshooting tips you can try:
1. Check the filter: If the filter is clogged, it can block the flow of water and prevent the dehumidifier from working properly. Clean or replace the filter if necessary.
2. Check the water tank: Make sure the water tank is full and that the float switch is set to the correct level. If the float switch is not set correctly, the dehumidifier will not turn on.
3. Check the drain hose: Make sure the drain hose is not kinked or clogged. If it’s kinked, straighten it out. If it’s clogged, clean it out.
4. Check the power supply: Make sure the dehumidifier is plugged in and that the outlet is working. If the outlet is not working, the dehumidifier will not turn on.
5. Check the humidistat: Make sure the humidistat is set to the correct humidity level. If the humidistat is not set correctly, the dehumidifier will not turn on.
6. Check the fan: Make sure the fan is working properly. If the fan is not working, the dehumidifier will not remove moisture from the air.
7. Check the coils: Make sure the coils are clean. If the coils are dirty, they can block the flow of water and prevent the dehumidifier from working properly.
8. Check the controls: Make sure the controls are functioning properly. If the controls are not working, the dehumidifier will not function properly.
If none of these troubleshooting tips work, you may need to contact a service technician for assistance.
What Are The Possible Reasons Why My Hisense Dehumidifier Is Not Pumping Water?
- 1. Clogged or damaged water collection tray: The water collection tray may become clogged with debris or ice, preventing the dehumidifier from functioning properly. Inspect the water collection tray and remove any blockages.
- 2. Low or restricted air flow: If the air filter is dirty or the air inlet is blocked, the dehumidifier will not be able to pull in enough air. Clean or replace the air filter and ensure the air inlet is not obstructed.
- 3. Defective or damaged water pump: The water pump may be broken or malfunctioning, preventing the dehumidifier from pumping water. Check the water pump for any signs of damage and replace if necessary.
- 4. Insufficient humidity level: If the humidity level in the room is too low, the dehumidifier may not be able to collect enough water. Check the humidity level in the room and adjust the thermostat setting if necessary.
- 5. Power outage: If the dehumidifier is not receiving power, it will not function. Check the power cord and outlet for any issues and ensure they are properly connected.
How Do I Troubleshoot My Hisense Dehumidifier If It Won’t Pump Water?
If your Hisense dehumidifier is not pumping water, there are a few steps you can take to troubleshoot the issue.
First, check the power cord and make sure it’s plugged in securely. If the power cord is loose, the dehumidifier may not receive enough power to operate properly.
Next, check the water reservoir and make sure it’s full. If the water level is too low, the dehumidifier won’t be able to pump water.
If the water reservoir is full and the power cord is secure, the next step is to check the filter. The filter should be cleaned or replaced regularly, as it can become clogged and prevent water from flowing through the dehumidifier.
If the filter is clean and the power cord is secure, the next step is to check the drain hose. The drain hose should be securely attached to the dehumidifier, and it should be positioned at a height that allows the water to drain properly. If the drain hose is clogged or positioned incorrectly, the dehumidifier won’t be able to pump water.
If you’ve checked all of the above and your Hisense dehumidifier is still not pumping water, you may need to contact the manufacturer for assistance. They may be able to provide additional troubleshooting steps or recommend a repair center.
In summary, if your Hisense dehumidifier is not pumping water, check the power cord, water reservoir, filter, and drain hose. If none of these issues are present, you may need to contact the manufacturer for assistance.
How Do I Clean The Water Pump In My Hisense Dehumidifier?
To clean the water pump in your Hisense dehumidifier, follow these steps:
1. Unplug the dehumidifier and empty the tank.
2. Remove the air filter and wash it thoroughly with clean water.
3. Locate the water pump in the back of the dehumidifier. It is usually located near the bottom, near the drain hose.
4. Disconnect the water pump from the dehumidifier.
5. Use a soft brush or cloth to gently clean the water pump. Be careful not to damage the delicate parts.
6. If the water pump is dirty or clogged, use a small brush or cotton swab to clean it.
7. Reconnect the water pump to the dehumidifier.
8. Plug the dehumidifier back in and turn it on.
9. Check the water tank for any leaks and ensure that it is securely attached.
10. Allow the dehumidifier to run for a few minutes to ensure that the water pump is working properly.
It is important to keep the water pump clean to prevent blockages and to ensure that the dehumidifier operates efficiently. Regularly check the water pump and clean it as needed.
How Do I Check The Water Pump In My Hisense Dehumidifier For Any Issues?
To check the water pump in your Hisense dehumidifier, follow these steps:
1. Unplug the dehumidifier and empty the water reservoir.
2. Locate the water pump. It is usually located at the bottom of the dehumidifier, near the rear.
3. Check the water pump for any visible signs of damage, such as cracks or leaks.
4. Listen for any unusual noises coming from the water pump. If you hear any noises that are out of the ordinary, this could be a sign of an issue with the pump.
5. Feel the water pump for any vibrations. If the pump is vibrating excessively, this could be a sign of a problem.
6. Check the drain hose for any kinks or blockages. A kinked or blocked hose can prevent the dehumidifier from properly draining the water.
7. Check the air filter for any blockages. A blocked air filter can prevent the dehumidifier from working properly.
8. If the water pump appears to be in good working order, but there is still an issue with the dehumidifier, it is possible that the problem is with the control board or the fan motor. In this case, you will need to contact a qualified technician for assistance.
It is important to regularly check the water pump in your Hisense dehumidifier to ensure that it is functioning properly. This will help to prevent water damage to your home and ensure that your appliance is working efficiently.
How Do I Replace The Water Pump In My Hisense Dehumidifier If It Is Broken?
To replace the water pump in your Hisense dehumidifier, follow these steps:
1. Unplug the dehumidifier from the power outlet.
2. Empty the tank of any remaining water.
3. Locate the water pump. It may be located behind the control panel or inside the unit.
4. Remove the screws or fasteners that secure the water pump in place.
5. Carefully disconnect the water pump from the unit.
6. Disconnect any hoses or wires connected to the water pump.
7. Take the old water pump to a hardware store or authorized service center and purchase a replacement pump.
8. Install the new water pump by reconnecting any hoses or wires and securing it in place with the screws or fasteners.
9. Plug the dehumidifier back into the power outlet.
10. Check the drain hose for any kinks or obstructions and clear if necessary.
11. Turn the dehumidifier on and let it run for a few minutes to ensure that it is functioning properly.
12. If the dehumidifier is still not functioning properly, contact the manufacturer for assistance.
Note:It is always a good idea to consult the user manual for your specific model before replacing the water pump.
The Bottom Line
In conclusion, if your Hisense dehumidifier is not pumping water, there are a few possible explanations. First, check to see if the unit is plugged in and turned on. If it appears to be running, check the water tank to see if it is full and empty it if necessary. If the water tank is empty and the unit is still not pumping water, there may be a problem with the pump. In this case, you should contact Hisense customer service for assistance.
